RTP Company Wear Resistant Thermoplastics Compounds

These compounds are common formulations which provide comparative information on the wear properties of this resin and various combinations of additives.

Instead of off-the-shelf solutions, RTP Company routinely develops specialty compounds with a precise combination of properties such as conductivity, flame retardance, structural reinforcement, color, and wear resistance to meet your exact application requirements.

Properties Product Description

English Metric View Wear Data For All POM Compounds In A Single Document

English Metric ESD 800 Static Dissipative - ESD Protection

English Metric RTP 800 Base Resin (Celcon M90)

English Metric RTP 800 SI 2 Silicone 2%

English Metric RTP 800 TFE 5 PTFE 5%

English Metric RTP 800 TFE 10 PTFE 10%

English Metric RTP 800 TFE 10 SI 2 PTFE 10% - Silicone 2%

English Metric RTP 800 TFE 15 PTFE 15%

English Metric RTP 800 TFE 20 PTFE 20%

English Metric RTP 800 TFE 20 DEL Homopolymer - PTFE 20%

English Metric RTP 882 TFE 10 Carbon Fiber 15% - PTFE 10%

English Metric RTP 800 AR 10 TFE 15 Aramid Fiber 10% - PTFE 15%

English Metric RTP 899 X 82676 F Proprietary Formulation

English Metric RTP 899 X 85698 A Proprietary Formulation

English Metric RTP 899 X 88188 Proprietary Formulation

English Metric RTP 899 X 90822 Proprietary Formulation

RTP 800 Series
Acetal
Compounds

Advantages
• Resistance to creep and fatigue
• Rigidity and resilience
• Resistance to solvents

Limitations
• High specific gravity
• Anisotropic shrinkage
• Processing difficulties

Acetals are rigid, creep resistant and strong. They possess low coefficients of friction. They remain stable in high temperature service and offer exceptional resistance to hot water environments.

They are virtually unaffected by strong bases but are attacked by strong mineral acids.

A 40% glass reinforced acetal has a flexural modulus of 1.6 psi x 10E-6 (11024 MPa) and 330 degrees F (166 degrees C) heat deflection temperature.

Supporting Product Information

Chemical
Resistance RTP Company
Nomenclature Wear
Additives

Information on resin resistance to chemical and environmental exposure. Guide to the identification system used for RTP Company products. Descriptions of common additives used in wear resistant compounds.

No information supplied by RTP Company constitutes a warranty regarding product performance or use. Any information regarding performance or use is only offered as suggestion for investigation for use, based upon RTP Company or other customer experience. RTP Company makes no warranties, expressed or implied, concerning the suitability or fitness of any of its products for any particular purpose. It is the responsibility of the customer to determine that the product is safe, lawful and technically suitable for the intended use. The disclosure of information herein is not a license to operate under, or a recommendation to infringe any patents.

[ Wear CD Start | Web CD Start ]