PAGE CONTENTS    (Navigation)

Standard Photoluminescent Tape Products

  • RTP Company's standard photoluminescent tape products are prequalified formulations typically manufactured to order specifications and are not stock materials.
  • Products are available in master rolls in widths from a minimum of 8 inches (200 mm) to a maximum of 36 inches (900 mm).
Nomenclature Resin Printable Light Stable Gauge Comments
EXT 2099 X 111406
SSC-64422
w/ White Backing		 Flexible, chemical and tear resistant thermoplastic polyolefin alloy Yes (1) Yes 10 mil
(0.010 in)		 1 mil top coat
7 mil glow layer
2 mil white backing
EXT 2099 X 111407
SSC-64422
No Backing		 Flexible, chemical and tear resistant thermoplastic polyolefin alloy Yes (1) Yes 8 mil
(0.008 in)		 1 mil top coat
7 mil glow layer
  1. Easily printed with water or solvent based inks using flexography, offset lithography, screen printing, and UV curable ink printing. Also can be laser marked.
  2. The high clarity top layer is a thin gauge film which provides abrasion-resistance. This protective film is also resistant to water, oil, acid, and alkali.
  3. Adhesive backing is not included and must be applied by customer.
    We recommend a product similar to the 3M Adhesive Transfer Tape 9472 LE. A 5.0 mil, high strength 300 LSE adhesive with 4.0 mil, 58 lb kraft paper liner. Bonds to plastic and oily metal. High Temperature holding, high moisture and solvent resistance.